Our Carbon boards make use of the latest technological developments and manufacturing processes used to build premium Carbon Sandwich construction paddle boards. Leaning on our extensive composite experience, we took those build processes and tailored and refined them to meet our expectations in performance, weight and durability for all our Zeal Surf products. We carefully calculated our laminate specifications to enhance the desirable flex-reflex characteristics of our boards and underwent further refinements through prototype testing until we had a product that exceeds the international standard, and of which we are proud to put our name on.
All Zeal Surf products are designed, made and tested in Cape Town South Africa. We have the added advantage of manufacturing our own boards in a hand-made, low volume environment where we can pay special attention to the build and quality of the product. Our Carbon Sandwich boards are built using a very lightweight expanded polystyrene blank (EPS) that is shaped using a computer numerical controlled (CNC) machine with an accuracy of up to 1mm. Once shaped, we lay down strategically, placed the high-quality lightweight glass and carbon fibre reinforcing then wrap the deck, hull and rails with a 3mm high-density PVC core that has excellent shear properties in composite construction with great impact resistance.
We then wrap the entire boards in off-axis +- 45 biaxial carbon fibre. This adds huge strength to the board, without compromising the desirable flex- reflex characteristics that generate huge amounts of speed and drive. We use Carbon Fiber for all our reinforcing: this provides unmatched strength and weight savings. The board is then placed into a vacuum bag to consolidate all the layers of material and remove excess resin, following which the board is placed in a temperature-controlled environment to post cure the resin and finish the composite structure.
Our Wood sandwich boards make use of the more traditional manufacture processes where cost is of more importance
Our Epoxy Tech boards are built using slightly denser expanded polystyrene blank (EPS) in comparison to our Carbon tech boards, this offers a more robust final product with a slight added weight penalty. The blank is shaped using a computer numerical controlled (CNC) machine with an accuracy of up to 1mm. We laminate the fin boxes and leash plug into the board using biaxial carbon fibre for added strength and weight savings. From there we Lay down 2 layers of E-glass on the bottom and have a wood sandwich construction (sustainable sourced 0.6mm bamboo veneer) on the deck. The veneer not only add a huge amount of strength and impact resistance especially in the standing area